Cis-coordination of the chromate anions in helical Co/Ni block-type polymeric systems. Structural and spectroscopic characteristics of catena(μ-CrO4-O,O′)[Co(HIm)3H2O] and catena(μ-CrO4-O,O′)[Co0.43Ni0.57(HIm)3H2O]

Two polymeric complexes: catena(μ-CrO₄-O,O′)[Co(HIm)₃H₂O] (1) and catena(μ-CrO₄-O,O′)[Co_0.43Ni_0.57(HIm)₃H₂O] (2) (where HIm=imidazole) with a cis-bridging coordination mode of the CrO₄ ²⁻ anion have been synthesized and characterized by X-ray and spectroscopic methods. These crystals were isolated from nine systems of varying reagent molar ratios and three excluding anions: Cl⁻, NO₃ ⁻ and SO₄ ²⁻ exclusively as mer [M(HIm)₃O₃]-type isomers. The unit cell of these isostructural complexes (monoclinic crystal system P2₁ /n) contains two independent helixes, left- and right handed, stabilized by intrahelical and interhelical hydrogen bonding and π–π interaction between pairs of the imidazole rings from neighbouring helixes. The Raman spectra at 77 K of 1 and 2 deconvoluted into lorentzian components revealed the block-type polymeric structure of the complexes. Moreover, the solution studies at millimolar concentrations of 1 and 2 indicated their complete decomposition in water. Four K electronic spectral analysis of the crystals (band deconvolution into gaussian components) enhanced with the data obtained in the polarized light allowed for assignment of the bands to the respective d–d transition (D_4h symmetry). It was found that the metallic centres are independently absorbing species, which supports the suggestion of a block-type structure of the polymers. The respective crystal field parameters for Co and Ni were calculated.     

Hydrogenated polybutadiene–polymethyl methacrylate (HPB–PMMA) block copolymer. I. Synthesis of polybutadiene–polymethyl methacrylate (PB–PMMA) block copolymer

To get hydrogenated polybutadiene-polymethyl methacrylate (HPB-b-PMMA) block copolymer to be used as a compatibilizer for blends of polyolefin/polar polymer, PB-b-PMMA was synthesized by anionic-free radical mechanism transformation polymerization. Selective extraction, gradient elution thin layer chromatography, and oil-oil emulsion separation techniques were tried to attempt to separate the copolymerization products. Hydrogenation of the PB sequence in PB-b-PMMA yielded HPB-b-PMMA. The compatibilizing function of PB-b-PMMA was shown in blending experiments. © 1993 John Wiley & Sons, Inc.     

Dielectric relaxation of poly(ester-ether-carbonate) multiblock terpolymers

The dielectric properties of a series of poly(ester-ether-carbonate) multiblock terpolymers have been investigated as a function of ether and carbonate composition in the frequency range of 10³–10⁶ Hz. The degree of polymerization of the samples was determined by viscosimetry measurements. The weight fraction, degree of crystallinity, and melting temperatures were characterized by means of x-ray diffraction and DSC methods. Dielectric behavior has been discussed in terms of Havriliak-Negami formulation. The variation of the dielectric properties with temperature has been associated with two relaxation processes: a) the -relaxation process observed at low temperature, which is associated to local motion of polar groups attached to both the soft and the hard segments, and b) the process assigned to long-range molecular motions above the glass transition temperature.     

基于储量结构变化的油田开发指标预测与优化数学模型研究

大型油田开发过程中,随着不同类型新储量的不断投入,地质储量结构发生变化,表征油田整体开发技术与经济效果的关键性指标,如产量、可采储量、采收率、储采比、开发成本与操作成本等等也随之改变,其变化规律可用一套数学模型来描述。在开发指标预测基础上,运用多属性决策方法如TOPSIS,可以实现新投产区块组合方案的优选。应用实例表明,本文方法实用、操作性强,可以为油区开发决策提供重要方法与手段。     

Synthesis and Crystal Structure of a Novel 1D Coordination Polymer: [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)]

The novel coordination polymer [Pr(BYBA)3(H2O)2]·[Pr(BYBA)3(H2O)] (BYBAH = 2-benzoylbenzoic acid) was yielded by hydrothermal synthesis, determined by single-crystal X-ray diffraction, and characterized by FT-IR and UV-Vis spectra. The crystal crystallizes in the triclinic system, space group P with a = 9.112(3), b = 14.644(5), c = 27.076(11) (A), α = 84.223(3), β = 87.816(4), γ = 88.902(4)o, V = 3592(2) (A)3, C84H60O21Pr2, Mr = 1687.14, Z = 2, F(000) = 1700, Dc = 1.560 g/cm3, μ = 1.419 mm-1, the final R = 0.0485 and wR = 0.1258 for 13035 observed reflections with I＞2((I). The compound contains two different building units, [Pr2(BYBA)6(H2O)4] and [Pr2(BYBA)6(H2O)2]. It is noticeable that [Pr2(BYBA)6(H2O)4] is an isolated binuclear building block, in which the Pr3 ion centers are both located in an eight-coordinated environment. However, in [Pr2(BYBA)6(H2O)2] the Pr3 ion centers are located in a nine-coordinated environment and connected by BYBA ligands to form 1D chains.     

反应挤出法合成S/B多嵌段共聚物的研究

在阴离子引发体系下 ,以双螺杆挤出机为反应器 ,采用丁二烯、苯乙烯混和单体加料方式 ,本体法一步合成了S B多嵌段共聚物 .考察了螺杆转速、进料速率以及不同丁苯配比对反应挤出合成PS及S B嵌段共聚物聚合转化率的影响 .用1 H NMR、IR、DMA、TEM等方法对S B嵌段共聚物进行了表征 ,结果表明共聚物由多个微小的丁二烯嵌段和少量无规段组成 .当丁二烯含量少至 15 %左右时 ,其嵌段可回缩成球状 ,粒径大约在 30～ 5 0nm .该材料的韧性随着共聚物中丁二烯含量的增加而逐渐提高 ,特别是断裂延伸率的提高尤为显著     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

用透射电镜法研究聚(苯乙烯-异戊二烯)二嵌段共聚物微相分离的微区尺寸

本文采用透射电镜(TEM)法,系统地研究了具有不同组成,不同分子量和不同形态结构的聚(苯乙烯-异戊二烯)二嵌段共聚物,并由TEM照片直接测量具有栓状,层状和有规双连续双金钢石(OBDD)结构的PS-PI二嵌共聚物的微区尺寸,讨论了其与分子量的关系。实验证明嵌段共聚物微相分离有规结构的微区尺寸大小与分子量呈2/3的关系。     

α－甲基苯乙烯对HIPS／SBS共混物流变行为及力学性能的影响

用锥板式流变仪研究了α－ＭＳ对ＨＩＰＳ／ＳＢＳ共混物流动行为的影响，结果表明：不同α－ＭＳ用量的共混物和如曲线相似．均随增加τ＿ｗ增大、η＿ａ下降。流动指数，ｎ均小于１为非牛顿假塑性流体。加入少量（约２．５％）α－ＭＳ使共混物熔融指数提高３倍，其总体力学性能变化不大。     

Enhancement of photocurrent generation by honeycomb structures in organic thin films.

A light-emitting poly (distyryldimethylbenzene-co-triethylene glycol) rod-coil block copolymer was used to fabricate films with three-dimensionally ordered honeycomb structures by the breath-figure method. Photocurrent generation and photovoltaic performance are studied, and the dependence of photocurrent on applied electric field is investigated. Introducing the ordered porous structure significantly improves the photoelectric conversion behavior, because porous structures not only enhance the light-harvesting efficiency but also benefit charge separation and charge transfer. This phenomenon may have great prospects for enhancing the photovoltaic behavior of organic thin-film devices.